ReP USP - Resultado da busca

Artigo de periodico
Thermodynamic analysis and optimization of a multi-stage compression system for CO2 injection unit: NSGA-II and gradient-based methods (2021)
Bidgoli, Ali Allahyarzadeh ; Mello, Paulo Eduardo Batista de; Dezan, Daniel Jonas; Saltara, Fábio ; Salviano, Leandro Oliveira ; Yanagihara, Jurandir Itizo
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EP
Subjects: DIÓXIDO DE CARBONO, CONSUMO DE ENERGIA ELÉTRICA, IMPACTOS AMBIENTAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BIDGOLI, Ali Allahyarzadeh et al. Thermodynamic analysis and optimization of a multi-stage compression system for CO2 injection unit: NSGA-II and gradient-based methods. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-19, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03164-5. Acesso em: 30 abr. 2024.
APA
Bidgoli, A. A., Mello, P. E. B. de, Dezan, D. J., Saltara, F., Salviano, L. O., & Yanagihara, J. I. (2021). Thermodynamic analysis and optimization of a multi-stage compression system for CO2 injection unit: NSGA-II and gradient-based methods. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-19. doi:10.1007/s40430-021-03164-5
NLM
Bidgoli AA, Mello PEB de, Dezan DJ, Saltara F, Salviano LO, Yanagihara JI. Thermodynamic analysis and optimization of a multi-stage compression system for CO2 injection unit: NSGA-II and gradient-based methods [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-19.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-021-03164-5
Vancouver
Bidgoli AA, Mello PEB de, Dezan DJ, Saltara F, Salviano LO, Yanagihara JI. Thermodynamic analysis and optimization of a multi-stage compression system for CO2 injection unit: NSGA-II and gradient-based methods [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-19.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-021-03164-5
Artigo de periodico
Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF) (2021)
Moreira, Tiago Augusto; Duarte, Juliana Pacheco; Nascimento, Francisco Júlio do; Ribatski, Gherhardt
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, NANOPARTÍCULAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOREIRA, Tiago Augusto et al. Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF). Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-16, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03035-z. Acesso em: 30 abr. 2024.
APA
Moreira, T. A., Duarte, J. P., Nascimento, F. J. do, & Ribatski, G. (2021). Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF). Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-16. doi:10.1007/s40430-021-03035-z
NLM
Moreira TA, Duarte JP, Nascimento FJ do, Ribatski G. Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF) [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-021-03035-z
Vancouver
Moreira TA, Duarte JP, Nascimento FJ do, Ribatski G. Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF) [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-021-03035-z
Artigo de periodico
An experimental study of refrigerant expansion inside coiled adiabatic capillary tubes and development of a general correlation (2021)
Shimizu, Gérson Koiti Kurosawa; Colmanetti, Alex Roger Almeida; Gardenghi, Álvaro Roberto; Cabezas Gómez, Luben ; Tibiriçá, Cristiano Bigonha
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: REFRIGERAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SHIMIZU, Gérson Koiti Kurosawa et al. An experimental study of refrigerant expansion inside coiled adiabatic capillary tubes and development of a general correlation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-20, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02762-z. Acesso em: 30 abr. 2024.
APA
Shimizu, G. K. K., Colmanetti, A. R. A., Gardenghi, Á. R., Cabezas Gómez, L., & Tibiriçá, C. B. (2021). An experimental study of refrigerant expansion inside coiled adiabatic capillary tubes and development of a general correlation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-20. doi:10.1007/s40430-020-02762-z
NLM
Shimizu GKK, Colmanetti ARA, Gardenghi ÁR, Cabezas Gómez L, Tibiriçá CB. An experimental study of refrigerant expansion inside coiled adiabatic capillary tubes and development of a general correlation [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-20.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02762-z
Vancouver
Shimizu GKK, Colmanetti ARA, Gardenghi ÁR, Cabezas Gómez L, Tibiriçá CB. An experimental study of refrigerant expansion inside coiled adiabatic capillary tubes and development of a general correlation [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-20.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02762-z
Artigo de periodico
Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions (2021)
Barbosa, Ismael Motta; Alves, Paulo Rodrigues; Silveira, Zilda de Castro
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TECNOLOGIAS DA SAÚDE, ACIDENTE VASCULAR CEREBRAL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARBOSA, Ismael Motta e ALVES, Paulo Rodrigues e SILVEIRA, Zilda de Castro. Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-16, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-02919-4. Acesso em: 30 abr. 2024.
APA
Barbosa, I. M., Alves, P. R., & Silveira, Z. de C. (2021). Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-16. doi:10.1007/s40430-021-02919-4
NLM
Barbosa IM, Alves PR, Silveira Z de C. Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-021-02919-4
Vancouver
Barbosa IM, Alves PR, Silveira Z de C. Upper limbs’ assistive devices for stroke rehabilitation: a systematic review on design engineering solutions [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-021-02919-4
Artigo de periodico
Identification of CO2 and O2 emissions dynamics in a natural gas furnace through flame images, ARMAX models, and Kalman filtering (2021)
Silva Neto, Gustavo Cunha da Silva ; Chui, Danilo de Santana ; Martins, Flavius Portella Ribas ; Fleury, Agenor de Toledo ; Furnari, Fausto
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EP
Subjects: COMBUSTÃO, FILTROS DE KALMAN, PROCESSAMENTO DE IMAGENS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA NETO, Gustavo Cunha da Silva et al. Identification of CO2 and O2 emissions dynamics in a natural gas furnace through flame images, ARMAX models, and Kalman filtering. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-13, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-02967-w. Acesso em: 30 abr. 2024.
APA
Silva Neto, G. C. da S., Chui, D. de S., Martins, F. P. R., Fleury, A. de T., & Furnari, F. (2021). Identification of CO2 and O2 emissions dynamics in a natural gas furnace through flame images, ARMAX models, and Kalman filtering. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-13. doi:10.1007/s40430-021-02967-w
NLM
Silva Neto GC da S, Chui D de S, Martins FPR, Fleury A de T, Furnari F. Identification of CO2 and O2 emissions dynamics in a natural gas furnace through flame images, ARMAX models, and Kalman filtering [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-13.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-021-02967-w
Vancouver
Silva Neto GC da S, Chui D de S, Martins FPR, Fleury A de T, Furnari F. Identification of CO2 and O2 emissions dynamics in a natural gas furnace through flame images, ARMAX models, and Kalman filtering [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-13.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-021-02967-w
Artigo de periodico
Self‑difusion in nanofuids of nonelongated particles in the dilute limit (2021)
Fariñas Alvariño, Pablo; Saiz Jabardo, José Maria; Cabezas Gómez, Luben
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: NANOPARTÍCULAS, ESCOAMENTO BIFÁSICO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FARIÑAS ALVARIÑO, Pablo e SAIZ JABARDO, José Maria e CABEZAS GÓMEZ, Luben. Self‑difusion in nanofuids of nonelongated particles in the dilute limit. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-18, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03101-6. Acesso em: 30 abr. 2024.
APA
Fariñas Alvariño, P., Saiz Jabardo, J. M., & Cabezas Gómez, L. (2021). Self‑difusion in nanofuids of nonelongated particles in the dilute limit. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-18. doi:10.1007/s40430-021-03101-6
NLM
Fariñas Alvariño P, Saiz Jabardo JM, Cabezas Gómez L. Self‑difusion in nanofuids of nonelongated particles in the dilute limit [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-18.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-021-03101-6
Vancouver
Fariñas Alvariño P, Saiz Jabardo JM, Cabezas Gómez L. Self‑difusion in nanofuids of nonelongated particles in the dilute limit [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-18.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-021-03101-6
Artigo de periodico
Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused flament fabrication with consumer‑grade ABS (2021)
Oliveira, Tarcisio Ladeia de; Carvalho, Jonas de
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, AERONAVES NÃO TRIPULADAS, MANUFATURA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Tarcisio Ladeia de e CARVALHO, Jonas de. Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused flament fabrication with consumer‑grade ABS. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-19, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03160-9. Acesso em: 30 abr. 2024.
APA
Oliveira, T. L. de, & Carvalho, J. de. (2021). Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused flament fabrication with consumer‑grade ABS. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-19. doi:10.1007/s40430-021-03160-9
NLM
Oliveira TL de, Carvalho J de. Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused flament fabrication with consumer‑grade ABS [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-19.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-021-03160-9
Vancouver
Oliveira TL de, Carvalho J de. Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused flament fabrication with consumer‑grade ABS [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-19.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-021-03160-9
Artigo de periodico
Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches (2021)
Santos, Artur Valadares de Freitas; Silveira, Zilda de Castro
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MANUFATURA, TECNOLOGIAS DA SAÚDE, TERCEIRA DIMENSÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Artur Valadares de Freitas e SILVEIRA, Zilda de Castro. Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-15, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03184-1. Acesso em: 30 abr. 2024.
APA
Santos, A. V. de F., & Silveira, Z. de C. (2021). Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-15. doi:10.1007/s40430-021-03184-1
NLM
Santos AV de F, Silveira Z de C. Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-15.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-021-03184-1
Vancouver
Santos AV de F, Silveira Z de C. Design for assistive technology oriented to design methodology: a systematic review on user‑centered design and 3D printing approaches [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-15.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-021-03184-1
Artigo de periodico
On the robustness of a model‑based inverse force identifcation applied on a structure submerged in diferent media (2020)
Álvarez Briceño, Ricardo Patricio; Naets, Frank; Desmet, Wim; Oliveira, Leopoldo Pisanelli Rodrigues de
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: FILTROS DE KALMAN, DINÂMICA DAS ESTRUTURAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ÁLVAREZ BRICEÑO, Ricardo Patricio et al. On the robustness of a model‑based inverse force identifcation applied on a structure submerged in diferent media. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-13, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02583-0. Acesso em: 30 abr. 2024.
APA
Álvarez Briceño, R. P., Naets, F., Desmet, W., & Oliveira, L. P. R. de. (2020). On the robustness of a model‑based inverse force identifcation applied on a structure submerged in diferent media. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-13. doi:10.1007/s40430-020-02583-0
NLM
Álvarez Briceño RP, Naets F, Desmet W, Oliveira LPR de. On the robustness of a model‑based inverse force identifcation applied on a structure submerged in diferent media [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-13.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02583-0
Vancouver
Álvarez Briceño RP, Naets F, Desmet W, Oliveira LPR de. On the robustness of a model‑based inverse force identifcation applied on a structure submerged in diferent media [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-13.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02583-0
Artigo de periodico
Impedance control as an optimal control problem:: a novel formulation of impedance controllers as a subcase of optimal control (2020)
Furtado, Guilherme Phillips ; Americano, Pedro Parik ; Forner Cordero, Arturo
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EP
Subjects: IMPEDÂNCIA ELÉTRICA, CONTROLE ÓTIMO, CONTROLADORES PROGRAMÁVEIS, MANIPULADORES MECÂNICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FURTADO, Guilherme Phillips e AMERICANO, Pedro Parik e FORNER CORDERO, Arturo. Impedance control as an optimal control problem:: a novel formulation of impedance controllers as a subcase of optimal control. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, n. 513, p. 1-20, 2020Tradução . . Disponível em: https://doi.org/10.1007%2Fs40430-020-02586-x. Acesso em: 30 abr. 2024.
APA
Furtado, G. P., Americano, P. P., & Forner Cordero, A. (2020). Impedance control as an optimal control problem:: a novel formulation of impedance controllers as a subcase of optimal control. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42( 513), 1-20. doi:10.1007%2Fs40430-020-02586-x
NLM
Furtado GP, Americano PP, Forner Cordero A. Impedance control as an optimal control problem:: a novel formulation of impedance controllers as a subcase of optimal control [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ;42( 513): 1-20.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007%2Fs40430-020-02586-x
Vancouver
Furtado GP, Americano PP, Forner Cordero A. Impedance control as an optimal control problem:: a novel formulation of impedance controllers as a subcase of optimal control [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ;42( 513): 1-20.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007%2Fs40430-020-02586-x
Artigo de periodico
Wind farm layout optimization based on CFD simulations (2020)
Cruz, Luís Eduardo Boni; Carmo, Bruno Souza
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EP
Subjects: ENERGIA EÓLICA, DINÂMICA DOS FLUÍDOS COMPUTACIONAL, TURBINAS, ALGORITMOS GENÉTICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CRUZ, Luís Eduardo Boni e CARMO, Bruno Souza. Wind farm layout optimization based on CFD simulations. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 57, p. 1-18, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02506-z. Acesso em: 30 abr. 2024.
APA
Cruz, L. E. B., & Carmo, B. S. (2020). Wind farm layout optimization based on CFD simulations. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 57, 1-18. doi:10.1007/s40430-020-02506-z
NLM
Cruz LEB, Carmo BS. Wind farm layout optimization based on CFD simulations [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 57 1-18.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02506-z
Vancouver
Cruz LEB, Carmo BS. Wind farm layout optimization based on CFD simulations [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 57 1-18.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02506-z
Artigo de periodico
Cross section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method (2020)
Ramos, Evérton Souza; Carrazedo, Rogério
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, ESTRUTURAS DE CONCRETO ARMADO, CORROSÃO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RAMOS, Evérton Souza e CARRAZEDO, Rogério. Cross section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-18, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02627-5. Acesso em: 30 abr. 2024.
APA
Ramos, E. S., & Carrazedo, R. (2020). Cross section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-18. doi:10.1007/s40430-020-02627-5
NLM
Ramos ES, Carrazedo R. Cross section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-18.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02627-5
Vancouver
Ramos ES, Carrazedo R. Cross section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-18.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02627-5
Artigo de periodico
Effects of streamwise wall curvature variation on the nonlinear evolution of different Görtler vortices wavelengths (2020)
Marques, Larissa Ferreira ; Rogenski, Josuel Kruppa ; Souza, Leandro Franco de
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: ICMC
Subjects: CURVATURA CONSTANTE, DINÂMICA DOS FLUÍDOS, VÓRTICES DOS FLUÍDOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARQUES, Larissa Ferreira e ROGENSKI, Josuel Kruppa e SOUZA, Leandro Franco de. Effects of streamwise wall curvature variation on the nonlinear evolution of different Görtler vortices wavelengths. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-15, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02442-y. Acesso em: 30 abr. 2024.
APA
Marques, L. F., Rogenski, J. K., & Souza, L. F. de. (2020). Effects of streamwise wall curvature variation on the nonlinear evolution of different Görtler vortices wavelengths. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-15. doi:10.1007/s40430-020-02442-y
NLM
Marques LF, Rogenski JK, Souza LF de. Effects of streamwise wall curvature variation on the nonlinear evolution of different Görtler vortices wavelengths [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-15.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02442-y
Vancouver
Marques LF, Rogenski JK, Souza LF de. Effects of streamwise wall curvature variation on the nonlinear evolution of different Görtler vortices wavelengths [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-15.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02442-y
Artigo de periodico
AT-d8sign: methodology to support development of assistive devices focused on user-centered design and 3D technologies (2020)
Santos, Artur Valadares de Freitas; Silveira, Zilda de Castro
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TECNOLOGIAS DA SAÚDE, DESIGN DE PRODUTOS, IMAGEM 3D, IMPRESSÃO, ENGENHARIA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Artur Valadares de Freitas e SILVEIRA, Zilda de Castro. AT-d8sign: methodology to support development of assistive devices focused on user-centered design and 3D technologies. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-15, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02347-w. Acesso em: 30 abr. 2024.
APA
Santos, A. V. de F., & Silveira, Z. de C. (2020). AT-d8sign: methodology to support development of assistive devices focused on user-centered design and 3D technologies. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-15. doi:10.1007/s40430-020-02347-w
NLM
Santos AV de F, Silveira Z de C. AT-d8sign: methodology to support development of assistive devices focused on user-centered design and 3D technologies [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-15.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02347-w
Vancouver
Santos AV de F, Silveira Z de C. AT-d8sign: methodology to support development of assistive devices focused on user-centered design and 3D technologies [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-15.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02347-w
Artigo de periodico
Flow boiling heat transfer of R134a in a 500 µm ID tube (2020)
Santos Filho, Erivelto dos; Aguiar, Gustavo Matana; Ribatski, Gherhardt
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: CANAIS DE ESCOAMENTO, TRANSFERÊNCIA DE CALOR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS FILHO, Erivelto dos e AGUIAR, Gustavo Matana e RIBATSKI, Gherhardt. Flow boiling heat transfer of R134a in a 500 µm ID tube. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-19, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02325-2. Acesso em: 30 abr. 2024.
APA
Santos Filho, E. dos, Aguiar, G. M., & Ribatski, G. (2020). Flow boiling heat transfer of R134a in a 500 µm ID tube. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-19. doi:10.1007/s40430-020-02325-2
NLM
Santos Filho E dos, Aguiar GM, Ribatski G. Flow boiling heat transfer of R134a in a 500 µm ID tube [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-19.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02325-2
Vancouver
Santos Filho E dos, Aguiar GM, Ribatski G. Flow boiling heat transfer of R134a in a 500 µm ID tube [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-19.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02325-2
Artigo de periodico
Pressure and shear stress analysis in a normal triangular tube bundle based on experimental flow velocity field (2020)
Rocha, Douglas Martins; Kanizawa, Fabio Toshio; Hayashi, Kosuke; Hosokawa, Shigeo; Tomiyama, Akio; Ribatski, Gherhardt
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, TUBOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROCHA, Douglas Martins et al. Pressure and shear stress analysis in a normal triangular tube bundle based on experimental flow velocity field. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, n. 4, p. 1-19, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02293-7. Acesso em: 30 abr. 2024.
APA
Rocha, D. M., Kanizawa, F. T., Hayashi, K., Hosokawa, S., Tomiyama, A., & Ribatski, G. (2020). Pressure and shear stress analysis in a normal triangular tube bundle based on experimental flow velocity field. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42( 4), 1-19. doi:10.1007/s40430-020-02293-7
NLM
Rocha DM, Kanizawa FT, Hayashi K, Hosokawa S, Tomiyama A, Ribatski G. Pressure and shear stress analysis in a normal triangular tube bundle based on experimental flow velocity field [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42( 4): 1-19.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02293-7
Vancouver
Rocha DM, Kanizawa FT, Hayashi K, Hosokawa S, Tomiyama A, Ribatski G. Pressure and shear stress analysis in a normal triangular tube bundle based on experimental flow velocity field [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42( 4): 1-19.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02293-7
Artigo de periodico
Simulating squirmers with volumetric solvers (2020)
Sanchez, Stevens Paz ; Buscaglia, Gustavo Carlos
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: ICMC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, DINÂMICA DOS FLUÍDOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANCHEZ, Stevens Paz e BUSCAGLIA, Gustavo Carlos. Simulating squirmers with volumetric solvers. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-27, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02604-y. Acesso em: 30 abr. 2024.
APA
Sanchez, S. P., & Buscaglia, G. C. (2020). Simulating squirmers with volumetric solvers. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-27. doi:10.1007/s40430-020-02604-y
NLM
Sanchez SP, Buscaglia GC. Simulating squirmers with volumetric solvers [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-27.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02604-y
Vancouver
Sanchez SP, Buscaglia GC. Simulating squirmers with volumetric solvers [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-27.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02604-y
Artigo de periodico
Improved localization in a corn crop row using a rotated laser rangefnder for three-dimensional data acquisition (2020)
Gasparino, Mateus Valverde; Higuti, Vitor Akihiro Hisano; Baquero Velasquez, Andres Eduardo; Becker, Marcelo
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: ROBÔS, AGRICULTURA DE PRECISÃO, PERCEPÇÃO, SENSOR, 3-D VER TERCEIRA DIMENSÃO., ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GASPARINO, Mateus Valverde et al. Improved localization in a corn crop row using a rotated laser rangefnder for three-dimensional data acquisition. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-10, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02673-z. Acesso em: 30 abr. 2024.
APA
Gasparino, M. V., Higuti, V. A. H., Baquero Velasquez, A. E., & Becker, M. (2020). Improved localization in a corn crop row using a rotated laser rangefnder for three-dimensional data acquisition. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-10. doi:10.1007/s40430-020-02673-z
NLM
Gasparino MV, Higuti VAH, Baquero Velasquez AE, Becker M. Improved localization in a corn crop row using a rotated laser rangefnder for three-dimensional data acquisition [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-10.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02673-z
Vancouver
Gasparino MV, Higuti VAH, Baquero Velasquez AE, Becker M. Improved localization in a corn crop row using a rotated laser rangefnder for three-dimensional data acquisition [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-10.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02673-z
Artigo de periodico
Preliminary studies on additive manufacturing of over 95% dense 3Y zirconia parts via digital imaging projection (2020)
Amaral, Leticia Bueno do; Paschoa, Jorge Luis Faneco; Magalhães, Daniel Varela ; Foschini, Cesar Renato ; Suchicital, Carlos T. A.; Fortulan, Carlos Alberto
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: IMAGEM 3D, IMPRESSÃO, CERÂMICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AMARAL, Leticia Bueno do et al. Preliminary studies on additive manufacturing of over 95% dense 3Y zirconia parts via digital imaging projection. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-8, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-019-2157-1. Acesso em: 30 abr. 2024.
APA
Amaral, L. B. do, Paschoa, J. L. F., Magalhães, D. V., Foschini, C. R., Suchicital, C. T. A., & Fortulan, C. A. (2020). Preliminary studies on additive manufacturing of over 95% dense 3Y zirconia parts via digital imaging projection. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-8. doi:10.1007/s40430-019-2157-1
NLM
Amaral LB do, Paschoa JLF, Magalhães DV, Foschini CR, Suchicital CTA, Fortulan CA. Preliminary studies on additive manufacturing of over 95% dense 3Y zirconia parts via digital imaging projection [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-8.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-019-2157-1
Vancouver
Amaral LB do, Paschoa JLF, Magalhães DV, Foschini CR, Suchicital CTA, Fortulan CA. Preliminary studies on additive manufacturing of over 95% dense 3Y zirconia parts via digital imaging projection [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-8.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-019-2157-1
Artigo de periodico
Estimation of the surface area‑to‑volume ratios of litter components of the Brazilian rainforest and their impact on litter fre rate of spread and fammability (2020)
Bufacch, Paulo; Santo, José Carlos; Carvalho Junior, João Andrade de; Krieger Filho, Guenther Carlos
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EP
Subjects: FLORESTAS TROPICAIS, RESÍDUOS FLORESTAIS, QUEIMADA, FOGO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BUFACCH, Paulo et al. Estimation of the surface area‑to‑volume ratios of litter components of the Brazilian rainforest and their impact on litter fre rate of spread and fammability. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, n. , 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02303-8. Acesso em: 30 abr. 2024.
APA
Bufacch, P., Santo, J. C., Carvalho Junior, J. A. de, & Krieger Filho, G. C. (2020). Estimation of the surface area‑to‑volume ratios of litter components of the Brazilian rainforest and their impact on litter fre rate of spread and fammability. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42( ). doi:10.1007/s40430-020-02303-8
NLM
Bufacch P, Santo JC, Carvalho Junior JA de, Krieger Filho GC. Estimation of the surface area‑to‑volume ratios of litter components of the Brazilian rainforest and their impact on litter fre rate of spread and fammability [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42( ):[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02303-8
Vancouver
Bufacch P, Santo JC, Carvalho Junior JA de, Krieger Filho GC. Estimation of the surface area‑to‑volume ratios of litter components of the Brazilian rainforest and their impact on litter fre rate of spread and fammability [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42( ):[citado 2024 abr. 30 ] Available from: https://doi.org/10.1007/s40430-020-02303-8

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration